Write a code in MatLAB where input message signal is your name and surname: "Name" "Surname". The signal sampling frequency will be 1 MHz, the carrier frequency will be 100 kHz and the number of samples per bit will be 20. The cut off frequency of the filter will be 25 kHz.
Run the code generated and present the signal forms: the input signal, the modulated signal and the output signal of the demodulator, the transmission channel is an ideal channel without noise.

Matlab implementation:
1. Assume the train of pulses frequency and any other required parameters.
2. Use a single tone signal as a modulating signal. Plot this signal in time domain and plot its frequency spectrum.
3. Plot the modulated signal (PAM, PWM and PPM) in time domain and its frequency spectrum.

Hi,

I am having some difficulty and not being able to figure it out how to

Add a default static route on Home Router so that it will deliver all packets correctly. ( What IP should I be using)
Add a static route to 44.1.1.0/24 on SF router.
I have attached the Cisco Packet Tracer and highlight where I got stuck. Please let me know if you are able to complete it