The project assignment is attached. I was trying to do a game for the false position method where the user tries to guess the convergence points but only has so many tries before the game is over and they have to restart. Must be done in MATLAB

This is to write a Matlab code that is given in the pdf along with a write up with these requirements.
It should be well formatted, with sections of the projected clearly
separated from each other. It should summarize all the above tasks and answers to
questions. All figures should be presented and referred to formally (i.e. Figure 1
shows). All equations used should be input using an equation editor. Short
introduction and conclusions required.

I have a laboratory report on flowmeters devices  such as petot, Venturi and orifice
It is required to find the difference of pressure, speed and the Reynolds number for each device when the control opening is different as 15mm, 30mm and 50mm.

I just need the calculations

Good afternoon. I am looking for a person who knows about Fluid mechanics (Transport phenomena) to help me during a timed homework. I am willing to pay any price, I just need to make sure I do great in this homework. It would be just two hours help on Monday April 20. From 2:15 Pm to 4:15 Pm and it would be online. Thank you in advance

Lab



Summary: title page, a few sentences summarizing key findings 
Introduction: a paragraph or two providing overview of experiment and purpose    Experimental Procedure: explain what was done to get the data, provide a picture of a wind tunnel from a different university and list your reference
Results & Discussion: include tables (label on top) and figures (label on bottom) properly named and labeled 
Conclusion: a paragraph or two restating key results and required future work. 

Your Results & Discussion section should address the items listed below. The entire report should be 3-5 pages, no more or less, double spaced.

1. Plot CL and CD vs. the angle of attack (AOA on the x-axis) all on one graph. Include the raw data and the corrected data (you will have 4 lines total on this graph).

2. Stall can be identified when the lift no longer increases for an increase in angle-of-attack. At what A

. [prob1.c][100%] Develop a C program to read hurricane data and store and sort those hurricane data.
Each hurricane record contains the hurricanes name, year, month, and category. An input file named
hurricane.txt contains 100 hurricane records. Your program will perform the following tasks.
a) Read hurricane data from input file hurricane.txt and store them in an array of structure. The
structure definition is shown below. Then write the hurricane data stored in the array of structure
to a binary file named hurricane.bin.
typedef struct hurricane
{
char name[20];
int year;
int month;
int category;
}H_RECORD;
b) Create a new structure for storing the same hurricane data. This new structure should contain the
same members (name, year, month, and category) but utilize a minimum size as a data type.
Take the definition of the new structure shown below as an example. Design this new structure
so that the value sizeof(H_RECORD_MIN) is minimiz

I need my assignment solved. The course is Mechanics of Deformable Bodies. It is a second-year engineering course. I will be receiving the exam tomorrow at 7:00 pm and will be having a whole day to complete it. To stay on the safe side I will be needing the assignment earlier than that which is preferred on April 17 at 4;00 pm. Please let me know if you can do this and how much it will cost. I have attached a similar exam below to give you an idea of how it will look. Thank you for your time.

First time user (not sure what prices are on here but message me with offer)
Steam (18kg/kmol) at 1600psi and 1000o F enters a turbine operating at steady state as shown. Twenty-two percent (22%) of the entering mass flow is extracted by duct 2 at 160psi and 450F. The rest of the steam exits at duct 3 at 1psi and 102F. The turbine develops a power output of 9x10^8 Btu/hr. Heat transfer to the surroundings accounts for 7% of the power output. Neglecting kinetic and potential energy effects,

a) Determine the mass flow rate of the steam entering the turbine in lb/hr.

b) Determine the mass flow rate of the steam entering the turbine in lb/hr by assuming that steam behaves as ideal gas at constant gama= 1.35 and compare to the exact result obtained in part a) above.

c) How would your result in part b) change if the inlet pressure is 1700psi and WHY?

Data: volume 0,35liters, compression ratio 1:9. 600J added in combustion between point 3 and 4 in the process.

Temperature and pressure in 1,2,3,4 in the otto cycle
Find energy added from 4-1

If a gas expands from point 4 to a new position 5, where the pressure is equal to the starting pressure. Then what is the temperature and volume in this point?

An Abstract (A brief summary of the problem)
Theory and solution procedure used (Include calculations, equations used and explain your solution procedure)
Calculations should be correct and complete
Necessary figures and tables must be clearly prepared with suitable captions
Discussion of the results, specifically focusing on the effect of design parameters. Clearly indicate and compare the required pump power for each case. Briefly discuss the impact of design changes.